Width (mm)

DES02

Fiberglass Scrim 02 x 02 (STD) - has a resin content of 22%, and an alkali resistant coating.

E glass fiberglass scrim mesh is a high tensile strength; high temperature and corrosion resistant reinforcement material commonly used as a backing for mosaics and stone work and as reinforcement for coatings on industrial vessels, pipes etc. and building walls, roofs and floors.  

DES10

Fiberglass Scrim 10 x 10 (STD) - has a resin content of 18%, and an alkali resistant coating.

E glass fiberglass scrim mesh is a high tensile strength; high temperature and corrosion resistant reinforcement material commonly used as a backing for mosaics and stone work and as reinforcement for coatings on industrial vessels, pipes etc. and building walls, roofs and floors.  

60 +-

5%

Roll Length (mtrs)

Width (mm)

Weight g/m²

Thick (mm)

Unit

DEF220AB/1270 (Black)

Roll Length (mtrs)

Width (mm)

Weight g/m²

Thick (mm)

Unit

DEF600Y

E glass fabric is woven by high quality E-glass texturized yarn, and then passes through an oven with high temperature in order to burn off the sizing and other organic elements in the cloth. After this heat treatment, fiberglass cloth will change to brown color and it will be smoke-free during the application. The fabric is also acrylic dip coated for weave locking the yarn to be fray resistant and easy to fabricators to cut and sew.

DEF600HT

E glass fabric is woven by high quality E-glass texturized yarn, and then passes through an oven with high temperature in order to burn off the sizing and other organic elements in the cloth. After this heat treatment, fiberglass cloth will change to brown color and it will be smoke-free during the application. The fabric is also acrylic dip coated for weave locking the yarn to be fray resistant and easy to fabricators to cut and sew.

DEF1100HT

E glass fabric woven from high quality texturized yarns, and then passed through a high temperature oven in order to burn off the sizing and other organic elements in the cloth. After this heat treatment, fiberglass cloth will change to a brown colour and it will be smoke-free during the application.

Application:

No difference from fiberglass loomstate, other than for applications where smoke is not allowed.

DEF1200HT/152

This coating provides short temperature resistance of 1000°C and increased continuous temperature resistance temperature up to 800°C. Vermiculite coated fiberglass cloths increase the products abrasion resistance and adds to its ability to withstand direct flame, it also provide a dust suppression coating which allows for a safer work environment.

Continuous up to 550ºC

Roll Length (mtrs)

Width (mm)

Weight g/m²

Thick (mm)

Unit

DEF220A

Acrylic coated fabric (weave set)

Fiberglass fabric is non-asbestos products used for both thermal and electrical insulation in applications including heat shields, welding, stress relieving, removable insulation covers, gasket products, fire blankets, fire curtains, expansion joints and flue ducts. The A finish is Alkaline resistant copolymer finish that also weave sets the flexible fabric, manufactured from continuous filament non-texturised (i.e. smooth) yarns.

After a 28 day immersion of 5% NaOH solution, the average retention rate for tensile fracture strength is greater than 70%.

DEF450A

Acrylic coated fabric (weave set)

Fiberglass fabric is non-asbestos products used for both thermal and electrical insulation in applications including heat shields, welding, stress relieving, removable insulation covers, gasket products, fire blankets, fire curtains, expansion joints and flue ducts. The A finish is Alkaline resistant copolymer finish that also weave sets the flexible fabric, manufactured from continuous filament non-texturised (i.e. smooth) yarns.

After a 28 day immersion of 5% NaOH solution, the average retention rate for tensile fracture strength is greater than 70%.

DEF400RW/1500

Re-wettable fabric - lagging product with the following properties:-

Rewettable This fabric is pre-pasted with adhesive and needs only to be dipped in water to soften and reactivate adhesion.

Adhesion - Bonds firmly to fiberglass, calcium silicate, mineral wool, urethane and asbestos.

Incombustibility Material is completely incombustible and meets all the requirements for Class 1 Sheathing materials.

Contour ability this fabric has been specifically designed to contour around tees and elbows uniformly and evenly.

DEF490RW/1500 (Alpha)

Re-wettable fabric - lagging product with the following properties:-

Rewettable This fabric is pre-pasted with adhesive and needs only to be dipped in water to soften and reactivate adhesion.

Adhesion - Bonds firmly to fiberglass, calcium silicate, mineral wool, urethane and asbestos.

Incombustibility Material is completely incombustible and meets all the requirements for Class 1 Sheathing materials.

Contour ability this fabric has been specifically designed to contour around tees and elbows uniformly and evenly.

Approvals US Coast Guard spec 164.009 Mil-l-24244, Mil-C-20079 G, Type 1, and Class 6.

DEF625V

E-glass fabric woven from high quality texturized yarn, coated with vermiculite on both sides. Vermiculite is a natural mineral which provides a natural Inorganic finish to fibreglass. This coating provides short term temperature resistance of
1000°C and increased continuous temperature resistance up to 800°C.

DEF840V/152

E-glass fabric woven from high quality texturized yarn, coated with vermiculite on both sides. Vermiculite is a natural mineral which provides a natural Inorganic finish to fibreglass. This coating provides short term temperature resistance of
1000°C and increased continuous temperature resistance up to 800°C.

DEF1150V/WR

E glass fabric woven from high quality texturised yarn with Stainless Steel wire in it, and then coated with vermiculite on both sides; finally an Acrylic Weave Locking Treatment is applied. The SS wire reinforcement increases the tensile strength greatly. Vermiculite is a natural mineral which provides a natural inorganic finish to fiberglass. This coating provides short temperature resistance of 1000°C and increased continuous temperature resistance temperature up to 800°C

DEF1250V/152

E-glass fabric woven from high quality texturized yarn, and then coated with vermiculite on both sides. Vermiculite is a natural mineral which provides a natural inorganic finish to fiberglass.

This coating provides short temperature resistance of 1000°C and increased continuous temperature resistance temperature up to 800°C

DEF1250VB/152

E-glass fabric woven from high quality texturized yarn, and then coated with Black vermiculite on both sides. Vermiculite is a natural mineral which provides a natural inorganic finish to fiberglass.

This coating provides short temperature resistance of 1000°C and increased continuous temperature resistance temperature up to 800°C

DEF1900V

E-glass fabric woven from high quality texturized yarn, and then coated with vermiculite on both sides. Vermiculite is a natural mineral which provides a natural inorganic finish to fiberglass.

This coating provides short temperature resistance of 1000^oC and increased continuous temperature resistance temperature up to 800^oC. Vermiculite coated fiberglass cloths increase the products abrasion resistance and adds to its ability to withstand direct flame, it also provide a dust suppression coating which allows for a safer work environment.

Roll Length (mtrs)

DEF220MY/1200

(MYLAR) is a fiberglass cloth woven by high quality E-glass filament yarn, and then coated with aluminium and polyester film on one side. These fabrics provide good properties of flexibility, durability, heat and light reflection

Application

It's the ideal and excellent fabrics used for cold insulation, reflective work wear, and pipe insulation.

DEF460MY

(MYLAR) is a fiberglass cloth woven by high quality E-glass filament yarn, and then coated with aluminium and polyester film on one side. These fabrics provide good properties of flexibility, durability, heat and light reflection

Application

It's the ideal and excellent fabrics used for cold insulation, reflective work wear, and pipe insulation.

DEF620HTAL/1500

Darco DEF620AL/1500 is an E glass fabric woven from high quality texturized yarn, and then passed through a high temperature oven in order to burn off the sizing and other organic elements in the cloth, and then laminated with 18 or 25 micron thick aluminium foil on one side. This fabric provides good properties of flexibility, durability, heat and light reflection.

DEF620AL/1500 has high temperature adhesive rated to 250 ºC

Application:

t’s the ideal and excellent fabric used for welding blankets, fire protecting curtains, fire protecting work wear, pipe and furnace insulation.

DEF663HTAL

E glass fabric that is laminated with a special higher temperature adhesive to Aluminium foil to provide a vapour retarder and a barrier to water and oil.

The product has been specifically designed as a flange shield material. Since it must meet Coast Guard Specification, a very low percentage of adhesive is used. Material should be tested prior to use for commercial applications.

DEF663AL/1500 (Alpha 2025/9480HT) meets the requirements of Coast Guard Specification 164.009 for fire retardant material and is included in Military Specification MIL-C-20079G, Type 1, Class 10. Also meets Military Specification MIL-I-24244B and NRC Guide 1.36

DEF940AL/SW

Navy Specification Square Weave E glass fabric with a laminated aluminium foil. This provides a heat reflecting surface for applications where radiated heat is an issue. This product is also well suited for the manufacture of removable insulation covers and valve covers, and anything else that needs protection from radiated heat.

DEF1000HTAL

E glass fabric woven from high quality filament yarn, and then coated with a specially formulated black acrylic elastomer on two sides. This fabric provides good properties of flexibility, durability, water and oil proof, abrasion resistance, and suitable for most chemical splash resistance.

DEF1600N

Neoprene coated E glass fabric woven from high quality texturized yarns

Applications: No difference from fiberglass loomstate, but especially for the application where smoke is not allowed.

Polyurethane COATED

.

Roll Length (mtrs)

DEF455P/PU2

DEF460P/PU2

DEF720P1/WR/1200

Polyurethane Coated 1 side, wire reinf GREY

• Flame-retardant finish, resistant up to a continuous temperature of approx. 700°C, short exposure up to approx. 750°C.
• Good antislip properties and fray proof

Available in different shades

DEF780P2/WR/1200

Grey, flame retardant PU- coating with aluminium pigments, alternatively one-sided
or double-sided.
- Free from solvents and halogen
- No thermal decomposition up to 200°C
- Maximum application temperature 500°C, shortly up to 600°C Increase of antislip properties and fray proof

Roll Length (mtrs)

DEF560P/GLS2 (Premium)

E glass fabric woven from premium quality filament yarn, and then coated with a specially formulated wet (liquid) silicone rubber and aluminum pigment on two sides. This fabric provides good properties of flexibility, durability, water and oil proof, abrasion resistance, and excellent resistance for general chemicals.

Certified to AS1530.3. Ref AWTA Fire Test Report 7-596811-BW dated 8 April 2014.

DEF560PGDS2/1500

E glass fabric woven from premium quality filament yarn, and then coated with a specially formulated drier (liquid) silicone rubber which is more slippery to make sewing easier. This fabric provides good properties of flexibility, durability, water and oil proof, abrasion resistance, and excellent resistance for general chemicals.

DEF580P/GLS2/1500 FM Approved

E glass fabric woven from premium quality filament yarn, and then coated with a specially formulated drier (liquid) silicone rubber which is more slippery to make sewing easier. This fabric provides good properties of flexibility, durability, water and oil proof, abrasion resistance, and excellent resistance for general chemicals.

(FM Approved)

DEF590P/GLS2/1500 (Premium)

E glass fabric woven from premium quality filament yarn, and then coated with a specially formulated wet (liquid) silicone rubber and aluminum pigment on two sides. This fabric provides good properties of flexibility, durability, water and oil proof, abrasion resistance, and excellent resistance for general chemicals.

Certified to AS1530.3. Ref AWTA Fire Test Report 7-596811-BW dated 8 April 2014.

DEF725GS1/WR/1200 

E glass fabric that is coated with a flame retardant PUR- coating with aluminum pigments and reinforced with stainless steel wire to provide a higher tensile strength

DEF900GLS2/WR/1200

GREY Silicone coated fiberglass - 890gsm

These fabrics provide good properties of flexibility, durability, water and oil proof, abrasion resistance, and excellent resistance for general chemicals.

Application

It?s the ideal and economic fabrics used for welding blanket, fire protecting curtain, expansion joints, and general insulation wrapping.

DEF1010GLS2/WR

Fiberglass cloth woven by high quality E-glass filament yarn and reinforced by stainless steel wire, then coated (or impregnated) with specially formulated wet (liquid) silicone rubber and grey pigment on both sides. These fabrics provide good properties of flexibility, durability, water and oil proof, abrasion resistance, and excellent resistance for general chemicals

DEF1110GLS2/WR/1200/HKO

E glass fabrics woven from high quality filament yarn, and then coated with a specially formulated wet (liquid) silicone rubber and aluminum pigment on two sides. These fabrics provide good properties of flexibility, durability, water and oil proof, abrasion resistance, and excellent resistance for general chemicals. 

DEF1150GLS2/1500

E glass fabrics woven from high quality filament yarn, and then coated with a specially formulated wet (liquid) silicone rubber and aluminum pigment on two sides. These fabrics provide good properties of flexibility, durability, water and oil proof, abrasion resistance, and excellent resistance for general chemicals. 

Roll Length (mtrs)

DEF590P/RLS2/1500

E glass fabric woven from premium quality filament yarn, and then coated with a specially formulated wet (liquid) silicone rubber and aluminum pigment on two sides. This fabric provides good properties of flexibility, durability, water and oil proof, abrasion resistance, and excellent resistance for general chemicals.

Certified to AS1530.3. Ref AWTA Fire Test Report 7-596811-BW dated 8 April 2014.

DEF1150RLS2 

DEF1910RLS1 

DEF2060RLS2 

DEF3500RLS2

RED Silicone coated fiberglass - 3500gsm

Properties:

• Coating used in temperature from -70°C to 300°C
• Ozone, oxide, light and weather aging resistance, excellent weather ability used outdoors and ages up to 10 years can be expected.

 Application:

It's the ideal and excellent fabric used for jacketing, welding blanket, fire protecting curtain, expansion joints, Non-metallic compensator, and anti-corrosion sector.

Roll Length (mtrs)

DEF860BLS1

E glass fabric woven from high quality E-glass filament yarn, and then coated with a specially formulated wet (liquid) silicone rubber and black pigment on one side. This fabric provides good properties of flexibility, durability, water and oil proof, abrasion resistance, and excellent resistance for general chemicals

TEFLON COATED FABRIC (Elastomer top coated for extra protection)

Roll Length (mtrs)

DEF560F1/1500-FC560F1

DEF580F1/1520 

DEF640F2/1500 

DSF630WBL/1524

DSF630WGB/1524

This cloth provides short temperature resistance of 1000°C and increased continuous temperature resistance up to 800°C. Acrylic coating increases the products abrasion resistance, it also provides a dust suppression coating which allows for a safer work environment

DSF650V

Darco woven silica glass vermiculite coated fabrics are woven continuous filament amorphous silica (non-respirable fibre yarns). Silica fabrics are mainly used above 550°C (above E glass rating) for all high temperature applications where the need for thermal insulation and/or protection is required

DSF650CV

Darco woven silica glass vermiculite coated fabrics are woven continuous filament amorphous silica (non-respirable fibre yarns). Silica fabrics are mainly used above 550°C (above E glass rating) for all high temperature applications where the need for thermal insulation and/or protection is required

DSF1150/A/BR

This cloth provides short temperature resistance of 1000°C and increased continuous temperature resistance up to 800°C. Acrylic coating increases the products abrasion resistance, it also provides a dust suppression coating which allows for a safer work environment

DSF1200CV